For polishing and spot polishing of all floor surfaces to be polished.
Recommended for floors treated with Kiilto Pro Kisu BT.
Intended for professional use.
Product pH: 8.5 Apply the varnish to a clean and dry floor. Dose directly onto the floor and apply with a slightly damp polishing mop and smooth evenly. Apply 1-3 coats depending on the degree of wear and tear of the floor and the level of subsequent use. Allow to dry for at least 30 minutes between each coat.
A spot polish is applied over Kiilto Pro Silk Gloss polish. Clean the floor surface with Kiilto Pro Teho A 100 and, when dry, apply one coat of varnish.
For daily cleaning, use manual or machine cleaning methods and Kiilto Pro One Cleaner. In addition to universal cleaners, it is recommended to use care products, such as Kiilto Pro Illusia 10, 1-2 times a week or as needed.
Coverage 80-120 m²/l, depending on the wear and tear of the floor and the spreading conditions. The varnish usually dries in about 30 minutes. Recommended working conditions: temperature 18-24 °C, relative humidity 40-70%.
For polishing and spot polishing of all floor surfaces to be polished.
Recommended for floors treated with Kiilto Pro Kisu BT.
Intended for professional use.
Product pH: 8.5 Apply the varnish to a clean and dry floor. Dose directly onto the floor and apply with a slightly damp polishing mop and smooth evenly. Apply 1-3 coats depending on the degree of wear and tear of the floor and the level of subsequent use. Allow to dry for at least 30 minute
More
